The PEX10000SFP 10 Gigabit Fiber Network Card is a cost-effective solution that delivers fast and reliable 10 Gbps network access at longer distances than copper-based networks. Using the SFP+ transceiver of your choice, you can connect your PCI Express-based server or workstation directly to your 10G fiber optic network. With the rising strain on network resources due to large file transfers, multimedia content, and an increase in network users, more bandwidth is oft.en required at various levels of your networking infrastructure. With up to 10 Gbps bandwidth, this fiber NIC lets you transfer more data at faster speeds, and is an ideal low-cost addition to your server or high-powered workstation. For improved operating efficiency, the PEX10000SFP features an energy-efficient Tehuti TN4010 chipset that offers significantly reduced power consumption versus most comparable cards, including the Intel 82599 chipset cards. Superior power efficiency also helps minimize heat generated by the card, in turn avoiding an increase in the operating temperature within your server case. This versatile 10 Gbps network card offers 16K Jumbo Frame and 802.1q VLAN tagging support, as well as compatibility with VMWare ESXi, Microsoft. Hyper-V virtualization soft.ware, and iSCSI support to combine LAN and SAN functions. FeaturesFaster networking with up to 10Gbps over fiber optic cablingBroad SFP+ compatibility and compliant with most 10 Gigabit SFP+ modules (10GBASE-LR/SR/LRM)Lower power consumption (4.12W max) than most comparable cards, with an energy-efficient chipsetVirtualization (VMWare ESXi and Microsoft. Hyper-V) and iSCSI supportCompliant with IEEE 802.3ae (10GBASE-LR/SR only) and IEEE 802.3aq (10GBASE-LRM)Up to 16K Jumbo Frame supportSupports 802.3ad (Link Aggregation) and 802.1Q (VLAN Tagging)Compliant with PCI Express Rev 2.0 specification, using PCIe x4 (or higher) slotSupports Checksum Offload (IP, TCP, UDP) and Large Send OffloadSupports PCI Message Signaled Interrupt (MSI)Configured with standard-profile bracket, low-profile/half-height bracket included, ideal for installation in 1U server and rackmount applicationsPCI-Express 10 Gigabit Ethernet Fiber Card with Open SFP & NICSpecificationsBus Type: PCI ExpressCard Type: Standard Profile (LP bracket incl. )Interface: Fiber (10 Gigabit Ethernet)Ports: 1Compatible Networks: 10 GbpsFull Duplex Support: YesJumbo Frame Support: 16K maxMaximum Data Transfer Rate: 20000 Mbps (20 Gbps) - Full-DuplexConnector Type(s): 1 - PCI Express x4 MaleExternal Ports: 1 - SFP+ Slot FemaleSystem and Cable Requirements: PCI Express x4 slotLED Indicators: 1 - Link/Activity (Green)Power Consumption (In Watts): 4.12W MaxHumidity: 20~80% RH (Non-Condensing)Operating Temperature: 0°C to 70°C (32°F to 158°F)Storage Temperature: -20°C to 85°C (-4°F to 185°F)Height: 4.7 in. (120 mm)Length: 3.3 in. (84 mm)Width: 0.7 in&#- SKU: AS164469

Hardware
Ports:1
Interface:Fiber (10 Gigabit Ethernet)
Bus Type:PCI Express
Card Type:Standard Profile (LP bracket incl.)

Industry Standards:
IEEE 802.3ae (10GBASE-LR/SR only), IEEE 802.3aq (10GBASE-LRM)
PCI Express Rev 2.0

Chipset ID:
Tehuti - TN4010
AMCC - QT2025 Connector(s)
Connector Type(s):1 - PCI Express x4 Male
External Ports:1 - SFP+ Slot Female Performance
Maximum Data Transfer Rate:20000 Mbps (20 Gbps) - Full-Duplex
Compatible Networks:10 Gbps
Full Duplex Support:Yes
Jumbo Frame Support:16K max.

Supported Protocols:
IEEE 802.3ad (Link Aggregation)
IEEE 802.1Q (VLAN Tagging)
IEEE 802.1P (Layer 2 Priority Encoding)
IEEE 802.3x (2005 Flow Control Support)
RFC 2819 (RMON MIB Statistics) Software
OS Compatibility:
Windows 8 / 8.1 (32/64bit), 7 (32/64)
Windows Server 2012, 2008 R2
Linux 2.6.24 and up (Tested up to 3.5)
VMWare ESXi 5.0/5.1
Microsoft Hyper-V Special Notes / Requirements
System and Cable Requirements:
Available PCI Express x4 slot
Not compatible with 10/100/1000 Mbps SFP
transceivers, 10 Gigabit SFP+ transceiver required Indicators
LED Indicators:1 - Link/Activity (Green)

Power
Power Consumption:4.12W Max

Included in Package
1 - 1 Port PCI Express 10GBase-LR/SR/LRM Fiber Network Card
1 - Low-Profile Bracket
1 - Driver CD
1 - Instruction Manual Item Dimension (L"xW"xH"):
6.57 x 5.51 x 1.10

Weight:
0.32 lb

Warranty Information:
2 years warranty