BrokerDen - Shop Detail

Shop Detail

JL Audio AP300/4 Amplifier 300 Watt 4 Channel

Model: 010-03429-00

300-WATT 4 CHANNEL AMPLIFIER: This 4 channel amplifier can power up to a maximum of four pairs of speakers or two pairs of speakers and one subwoofer.
EASY TUNE FEATURE: For additional optimization, pair with a Fusion(R) stereo with built-in DSP, and download the Fusion(R) Audio app for selectable profiles. This enables the Easy Tune feature, which streamlines amplifier setup to ensure superior sound quality and system protection.
CLASS-D AMPLIFIER TECHNOLOGY: The highly efficient Class-D design provides lower battery drain with a higher output than Class-AB amplifiers. This delivers increased power to the connected speakers/subwoofers for an enhanced level of audio performance.
RUGGED DESIGN: These amplifiers offer superior levels of durability and are built to IP67 standards (excluding cables) to withstand abuse in harsh marine environments.

Specifications
Channels

4
Physical dimensions (Height)	10.43in (265 mm)
Physical dimensions (Width)	10.43in (265 mm)
Physical dimensions (Depth)	4.90in (125 mm)
Operating voltage	9-16 VDC
Water and dust rating	IP67
Operating temperature range	4 deg to 149 deg F (-20 deg to 65 deg C)
Warranty	3 years
Audio
Amplifier class	Class D
Rated continuous (RMS) power (14.4 V input @ 4 Ohm less than 1% THD)	50 W x 4/150 W x 2 (Bridged)
Rated continuous (RMS) power (14.4 V input @ 2 Ohm less than 1% THD)	75 W x 4
Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog Inputs	Greater than 70 dB
Frequency response (+0, -1dB)	20 Hz-20 kHz
Input sensitivity @ RCA inputs	Switchable from 200 mV-2 V RMS (Low) to 800 mV-8 V RMS (High)
Current consumption (Standby)	Less than 1mA
Current consumption (Idle)	700-750mA
Fuse rating	35A
Recommended fuse type(s)	AFS, AGU or MaxiFuse
Min. copper power/Ground wire gauge	4 AWG wire
Protection circuits	Input under/over voltage Over temperature Output short circuit

What's in the Box:

N/A